User guide

VoIP EP command reference VoIP phone ports
6-111
iMG/RG Software Reference Manual (Voice Service)
6.3.3.1.46 VOIP EP SHOW
Syntax VOIP EP ANALOGUE SHOW <name>
Description This command displays the following information about a named access port:
•Physical Port
• Typology
• Operational status
• Comfort Noise Generation (CNG)
• Codec Capabilities
• Country
• Critical-digit time
• Inter-digit time
•Dialing Mode
•Digit map
•Dial mask
• Line Echo Cancellation
•Jitter Delay
• Voice Activity Detection (VAD)
• Off-hook time
• On-hook time
• Rx gain
• Tx gain
• Attached users
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue show prt0
--> voip ep analogue show tel1
Option Description Default Value
name An existing access port. To display the existing access port
names, use the VOIP EP ANALOGUE LIST command.
N/A