User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-110
6.3.3.1.44 VOIP EP SET UNREGISTERED-TONE
Syntax
VOIP EP ANALOGUE SET <name> UNREGISTERED-TONE {ENABLE|DISABLE}
Description This command enables/disables a tone generated when the user is not registered. By
default, if the user is not registered and no FDB entries exist a reorder tone is generated.
If the unregistered-tone is disabled, no tones are generated.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set tel1 unregistered-tone disabled
6.3.3.1.45 VOIP EP SET VAD
Syntax VOIP EP ANALOGUE SET <name> VAD <status>
Description This command enables or disables the voice activity detection feature on the port
referred to by the named access port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 vad off
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
Option Description Default Value
name An existing access port. To display the existing access port
names, use the VOIP EP ANALOGUE LIST command.
N/A
Option Description Default Value
name An existing access port. To display the existing access port
names, use the VOIP EP ANALOGUE LIST command.
N/A
status The status of the VAD feature.
Valid values are:
• on VAD enabled
• off VAD disabled
N/A