User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-108
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.41 VOIP EP SET STUTTER-DIAL-TONE
Syntax VOIP EP ANALOGUE SET <name> STUTTER-DIAL-TONE {PERIODIC|SIN-
GLE-REPETITION}
Description This command sets the mode to play the stutter dial tone usually used to signal a waiting
message is available. The tone can be played periodically or only once (single repetition).
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set tel1 stutter-dial-tone periodic
6.3.3.1.42 VOIP EP SET SUPPLEMENTARY-SERVICE-PREFIX
Syntax VOIP EP ANALOGUE SET <name> SUPPLEMENTARY-SERVICE-PREFIX
<digit-map>
Description This command sets a prefix used by iMG to switch the status of the supplementary ser-
vices. When the user dials this prefix iMG plays the “stutter dial”, the user must dial a
phone number. iMG sends an INVITE containing the prefix and dialed number. The
server recognizes the prefix and used the dialed number to enable or disable some sup-
plementary services. The effects on this INVITE on the server depend on the server pro-
visioning. The feature is available only on SIP protocol and must be supported by the SIP
server.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
name An existing access port. To display the existing access
port names, use the VOIP EP ANALOGUE LIST com-
mand.
N/A