User guide

VoIP EP command reference VoIP phone ports
6-107
iMG/RG Software Reference Manual (Voice Service)
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 onhook-time 250
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.40 VOIP EP SET RXGAIN
Syntax VOIP EP ANALOGUE SET <name> RXGAIN <gain>
Description This command sets the input gain (in the direction from iMG/VoIP network to phone/
user) of the port referred to by the named access port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 rxgain –3.0
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
Option Description Default Value
name An existing access port. To display the existing
access port names, use the VOIP EP ANALOGUE
LIST command.
N/A
msecs The on-hook time in milliseconds. Valid values are in
the range 100 to 500msec.
N/A
Option Description Default Value
name An existing access port. To display the existing access
port names, use the VOIP EP ANALOGUE LIST
command.
N/A
gain The value of rx gain in dB. Valid values are from –
48dB to +28dB.
N/A