User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-106
Example --> voip ep analogue set prt0 lec 16
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.38 VOIP EP SET OFFHOOK-TIME
Syntax VOIP EP ANALOGUE SET <name> OFFHOOK-TIME <msecs>
Description This command set the off-hook time on the port referred to by the named access port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 offhook-time 350
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.39 VOIP EP SET ONHOOK-TIME
Syntax VOIP EP ANALOGUE SET <name> ONHOOK-TIME <msecs>
Description This command set the on-hook time on the port referred to by the named access port.
msecs The length in milliseconds of the buffer used for echo can-
cellation. Valid values are 0, 8, 16, 32 msec depending on
iMG family.
8 msec
Option Description Default Value
name An existing access port. To display the existing
access port names, use the VOIP EP ANALOGUE
LIST command.
N/A
msecs The off-hook time in millisecond. Valid values are
from 100 to 500msec.
N/A