User guide

System command reference System Management
1-35
iMG/RG Software Reference Manual (System Configuration)
1.1.5.1.35 SYSTEM SET USER MAYDIALIN
Syntax SYSTEM SET USER <name> MAYDIALIN {ENABLED|DISABLED}
Description This command sets dial in permissions for a user who has been added to the system using
the SYSTEM ADD USER command. Only a Super user can use this command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> system set user ckearns maydialin enabled
See also SYSTEM SET USER ACCESS
SYSTEM SET USER MAYCONFIGURE
1.1.5.1.36 SYSTEM SET USER PASSWORD
Syntax SYSTEM SET USER <name> PASSWORD <password>
Description This command sets the user password that was previously created using the user pass-
word command. Only a Super user can use this command..
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
NAME The name of an existing user. N/A
ENABLED/
DISABLED
Determines whether a user can dialin to the system (func-
tionality not available on current software version).
enabled
Option Description Default Value
NAME The name of an existing user. N/A
PASSWORD The password for the user N/A