User guide

VoIP EP command reference VoIP phone ports
6-105
iMG/RG Software Reference Manual (Voice Service)
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.36 VOIP EP SET JITTERMODE
Syntax VOIP EP ANALOGUE SET <name> JITTERMODE {ADAPTIVE | FIXED |
SEQUENTIAL}
Description This command sets the type of jitter buffering that will be used by the gateway.
The default mode is ‘fixed’.
Note: Some gateway products support only fixed jitter buffering. Attempting to change the jitter buffer mode on
these devices will result in a ‘webserver: Not available Parameter’ error.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 jittermode adaptive
VOIP EP ANALOGUE SHOW
6.3.3.1.37 VOIP EP SET LEC
Syntax VOIP EP ANALOGUE SET <name> LEC <msecs>
Description This command sets the line echo cancellation length on the port referred to by the
named access port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
name An existing access port. To display the existing access port
names, use the VOIP EP ANALOGUE LIST command.
N/A
Option Description Default Value
name An existing access port. To display the existing access port
names, use the VOIP EP ANALOGUE LIST command.
N/A