User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-104
6.3.3.1.34 VOIP EP SET INTERNAL-3-WAY-CALL
Syntax
VOIP EP ANALOGUE SET <name> INTERNAL-3-WAY-CALL {ENABLE | DISABLE}
Description This command disables or enables internal 3-way calls. It is disabled by default.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 internal-3-way-call enable
VOIP EP ANALOGUE SHOW
VOIP EP ANALOGUE LIST
6.3.3.1.35 VOIP EP SET JITTERDELAY
Syntax VOIP EP ANALOGUE SET <name> JITTERDELAY <msecs>
Description This command sets the jitter delay value on the port referred to by the named access
port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 jitterdelay 6
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
Option Description Default Value
name An existing access port. To display the existing access port
names, use the VOIP EP ANALOGUE LIST command.
N/A
Option Description Default Value
name An existing access port. To display the existing
access port names, use the VOIP EP ANA-
LOGUE LIST command.
N/A
msecs The delay in milliseconds that the jitter buffer
waits before it transmits the data samples that
are collected from the VoIP network.Valid values
are from 0.16 to 0.32 msec:
N/A