User guide

VoIP EP command reference VoIP phone ports
6-101
iMG/RG Software Reference Manual (Voice Service)
Example --> voip ep analogue set tel1 hold-local-tone-service enabled
6.3.3.1.30 VOIP EP SET HOTLINE TIME-OUT
Syntax voip ep analogue set <name> hotline time-out <sec>
Description This command set the number of seconds between the off hook and the beginning of the
digit collection when the feature is enabled.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Table 15 – voip ep set hotl-timeout command parameters
Example --> voip ep analogue set tel1 hotline time-out 4
--> voip ep digital set tel hotline time-out 4
6.3.3.1.31 VOIP EP SET HOTLINE DISABLE
Syntax VOIP EP ANALOGUE SET <name> HOTLINE DISABLE
Description This command disables the hotline feature on the selected analogue port.
6.3.3.1.32 VOIP EP SET HOTLINE ENABLE
Syntax VOIP EP ANALOGUE SET <name> HOTLINE ENABLE ACTI-PREFIX <act-
prefix> DEACT-PREFIX <deact-prefix> REACT-PREFIX <react-pre-
fix> [ADDRESS <address>]
Option Description Default Value
name An existing endpoint name. -
sec The number of seconds between the off-hook and
the beginning of the digit collection
Valid values are from 0 to 30.
2
Option Description Default Value
name An existing endpoint name. -