User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-98
6.3.3.1.25 VOIP EP SET DIGITMAP
Syntax VOIP EP ANALOGUE SET <name> DIGITMAP <digit-map>
Description This command sets the digit map rule on the physical port referred to by the named
access port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 digitmap x.T
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.26 VOIP EP SET EMERGENCY-SERVICE-NUMBER
Syntax
VOIP EP ANALOGUE SET <name> EMERGENCY-SERVICE-NUMBER <digit-map>
Description This command sets the rule used to understand when the dialed number is an emer-
gency call. When a number matching the digit-map is dialed the invite with this number is
Option Description Default Value
name An existing access port. To display the existing
access port names, use the VOIP EP ANA-
LOGUE LIST command.
N/A
digit-map The digit map expression. A Digit map may have
up to 32 chars.
The following symbols can be used:
• DTMF: A digit from '0' to '9' or one of
the symbols ‘A’, ‘B’, ‘C’, ‘D’. Symbols ‘#’
and ‘*’, if needed, must be added sepa-
rately.
• Timer: The symbol ‘T’
• Wildcard: The symbol ‘x’
• Range: The symbols ‘[‘ and ‘]’
• Subrange: The symbol ‘-’
• Position: The symbol ‘.’
N/A