User guide

System Management System command reference
iMG/RG Software Reference Manual (System Configuration)
1-34
1.1.5.1.33 SYSTEM SET USER ACCESS
Syntax SYSTEM SET USER <name> ACCESS {DEFAULT|ENGINEER|SUPERUSER}
Description This command sets the access permissions of a user who has been added to the system
using the SYSTEM ADD USER command. Only a Super user can use this command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> system set user ckearns access default
See also SYSTEM SET USER MAYCONFIGURE
SYSTEM SET USER MAYDIALIN
1.1.5.1.34 SYSTEM SET USER MAYCONFIGURE
Syntax SYSTEM SET USER <name> MAYCONFIGURE {ENABLED|DISABLED}
Description This command sets configuration permissions for a user who has been added to the sys-
tem using the ADD SYSTEM USER command. Only a Super user can use this command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> system set user ckearns mayconfigure enabled
See also SYSTEM SET USER ACCESS
SYSTEM SET USER MAYDIALIN
Option Description Default Value
NAME The name of an existing user. N/A
DEFAULT/
ENGINEER/
SUPERUSER
Lets you to set the access permissions for a user. default
Option Description Default Value
NAME The name of an existing user. N/A
ENABLED/
DISABLED
Determines whether a user can configure the system. disabled