User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-94
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 conference-service N-way
See also voip ep analogue create
voip ep analogue disable
voip ep analogue delete
voip ep analogue enable
voip ep analogue list
voip ep analogue show
6.3.3.1.22 VOIP EP SET COUNTRY
Syntax VOIP EP ANALOGUE SET <name> COUNTRY <country>
Description This command sets dial tone, busy tone and ring back tone frequencies and cadences on
the physical port referred to by the named access port, appropriately for the selected
country.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
name A name that identifies an existing access port. To display
access port names, use the voip ep list command.
N/A
conf-type Valid values are:
• 3-way
• N-way
3-way
Option Description Default Value
name An existing access port. To display access port names,
use the VOIP EP ANALOGUE LIST command.
N/A