User guide

VoIP EP command reference VoIP phone ports
6-93
iMG/RG Software Reference Manual (Voice Service)
Description This command sets the codec capability list for an existing access port.
Note: T.38 support must always be selected together with another speech codec (G711a/u or G726 or
G729ab).
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 codecs g711a,g711u,g729ab
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.21 VOIP EP SET CONFERENCE-SERVICE
Syntax VOIP EP ANALOGUE SET <name> CONFERENCE-SERVICE <conf-type>
Description This command sets conference-service feature. It is possible allow N-way conference or
limit the feature to a 3-way conference. The feature is available only for the SIP protocol
and requires the “SONUS” profile.
Option Description Default Value
name An existing access port. To display access port names, use
the VOIP EP ANALOGUE LIST command.
N/A
codec-list The value or a comma separated list of values defining the
compression algorithm on codec.
Valid values are:
g711a: referring to G.711 a-law PCM
g711u: referring to G.711 µ-law PCM
g729ab: referring to G.729A/B 8 kbps ACELP A/B
g726-16: referring to G.726 16 kbps
g726-24: referring to G.726 24 kbps
g726-32: referring to G.726 32 kbps
g726-40: referring to G.726 40 kbps
T38
N/A