User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-92
Example --> voip ep analogue set prt0 clir on off-prefix *1
See also voip ep analogue create
voip ep analogue disable
voip ep analogue delete
voip ep analogue enable
voip ep analogue list
voip ep analogue show
6.3.3.1.19 VOIP EP SET CNG
Syntax VOIP EP ANALOGUE SET <name> CNG <status>
Description This command enables or disables the comfort noise generation feature.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt0 cng off
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DISABLE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SHOW
6.3.3.1.20 VOIP EP SET CODECS
Syntax VOIP EP ANALOGUE SET <name> CODECS <codec-list>
on-prefix The digitmap to be used to enable the caller identifier
for the successive call.
N/A
off-prefix The digitmap to be used to disable the caller identifier
for the successive call.
N/A
Option Description Default Value
name An existing access port. To display access port names,
use the VOIP EP ANALOGUE LIST command.
N/A
status The status of the comfort noise generation feature.
Valid values are:
Off: CNG disabled
On: CNG enabled