User guide

VoIP EP command reference VoIP phone ports
6-91
iMG/RG Software Reference Manual (Voice Service)
• CC: The country code will be omitted from the CLIP address delivered to the hand-
set.
• CC+AC: Both the country code and area code will be omitted from the CLIP
address delivered to the handset.
• REPLACE: The specified prefix ‘prefix-digit’ will be replaced with ‘digit’.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue set prt1 clip-reduction replace 0064 replacement 0
See also VOIP EP ANALOG SHOW
6.3.3.1.18 VOIP EP SET CLIR
Syntax VOIP EP ANALOGUE SET <name> CLIR { ON OFF-PREFIX <off-prefix>
| OFF ON-PREFIX <on-prefix>}
Description This command enables or disables the caller identifier restriction.
There are four different situations:
• CLIR ON: The Caller ID Restriction is always ON.
• CLIR OFF: The Caller ID Restriction is always OFF.
• CLIR ON OFF_PREFIX <off-prefix>: The Caller ID Restriction is always ON but it
can be disabled for the next call dialing the off-prefix.
• CLIR OFF ON_PREFIX <on-prefix>: The Caller ID Restriction is always OFF but it
can be enabled for the next call dialing the on-prefix.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
prefix-digits
A digit string of 1 - 8 digits in length.
none
digit
A digit string of 1 - 8 digits in length.
none
Option Description Default Value
name A name that identifies an existing access port. To dis-
play access port names, use the voip ep list command.
N/A