User guide

VoIP EP command reference VoIP phone ports
6-85
iMG/RG Software Reference Manual (Voice Service)
Example --> voip ep analogue set tel1 call-on-hold service enabled
6.3.3.1.11 VOIP EP SET CALL-WAITING-SERVICE
Syntax VOIP EP ANALOGUE SET <name> CALL-WAITING-SERVICE
{ENABLED|DISABLED}
Description This command enables/disables the call waiting supplementary service. When enabled, a
user already busy in a call is notified of a new incoming call via a special waiting tone and
then the user can put the current call on hold using the flash-hook button and answer the
new call. Then the user can switch between each call simply pressing the flash-hook but-
ton.
Note: The call-waiting service is available only if the active VoIP protocol is SIP.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
6.3.3.1.12 VOIP EP SET CFWD ALL-CALLS
Syntax VOIP EP ANALOGUE SET <name> CFWD ENABLE ALL-CALLS ON-PREFIX
<on-prefix> ON-SUFFIX <on-suffix> OFF-PREFIX <off-prefix>
VOIP EP ANALOGUE SET <name> CFWD DISABLE ALL-CALLS
VOIP EP DIGITAL SET <name> CFWD ENABLE ALL-CALLS ON-PREFIX <on-prefix>
ON-SUFFIX <on-suffix> OFF-PREFIX <off-prefix>
VOIP EP ANALOGUE SET <name> CFWD DISABLE ALL-CALLS
Description This command enables/disables the call forwarding on all calls supplementary service.
When enabled, an incoming call is automatically redirected to the forwarded number the
user as specified via the phone dialpad.
To enable the service the user has to enter a special code, the on-prefix code, to inform the intelligent Multiser-
vice Gateway that the remaining digits constitute the forwarded numer. The selection of the forwarded number
terminates as soon the user enter the on-suffix code.
To temporary disable the service, the user has to enter a special code, the off-prefix code.
Note: The call-forwarding service is available only if the active voip protocol is SIP.
Option Description Default Value
name An existing analogue endpoint name. -
enable Enable the call-waiting service. Disabled
disable Disable the call-waiting service