User guide

VoIP EP command reference VoIP phone ports
6-81
iMG/RG Software Reference Manual (Voice Service)
PASS : FEMF Tip/Ring Current : Info Only : .37332mA
---------------------------------------------------------------------
PASS : Ringer Equivalance : N/A : No Problems
Found
---------------------------------------------------------------------
PASS : Resistive Fault (Tip/Ring) : R >= 150k : 19969k
PASS : Resistive Fault (Tip/Ground) : R >= 150k : 2372k
PASS : Resistive Fault (Ring/Ground) : R >= 150k : 2553k
6.3.3.1.4 VOIP EP DISABLE
Syntax VOIP EP ANALOGUE DISABLE <name>
Description This command disables the physical port referred to by the named access port.
Use the VOIP EP SHOW command to retrieve the Operational Status of a specific port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep analogue disable prt0
See also VOIP EP ANALOGUE CREATE
VOIP EP ANALOGUE DELETE
VOIP EP ANALOGUE ENABLE
VOIP EP ANALOGUE LIST
VOIP EP ANALOGUE SET
VOIP EP ANALOGUE SHOW
6.3.3.1.5 VOIP EP ENABLE
Syntax VOIP EP ANALOGUE ENABLE <name>
Description This command enables the physical port referred to by the named access port.
Use the VOIP EP SHOW command to retrieve the Operational Status of a specific port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
name An existing access port. To display existing access
port names, use the VOIP EP LIST command.
N/A