User guide

VoIP EP command reference VoIP phone ports

6-77

iMG/RG Software Reference Manual (Voice Service)

6.3.3.1.1 VOIP EP CREATE

Syntax

VOIP EP ANALOGUE CREATE <name> TYPE <port-type> PHYSICAL-PORT <phy-port-id>

Description This command adds a named access port and binds it to a physical access port.

If the physical resource is already assigned to another named port, an error is raised and

the command fails.

VOIP EP SET FLASHHOOK-TIME XXXXX X X X X

VOIP EP SET HOLD-LOCAL-TONE-SERVICE XXXXX X X X X

VOIP EP SET HOTLINE TIME-OUT XXXXX X X X X

VOIP EP SET HOTLINE DISABLE XXXXX X X X X

VOIP EP SET HOTLINE ENABLE XXXXX X X X X

VOIP EP SET IDT-PARTIAL XXXXX X X X X

VOIP EP SET INTERNAL-3-WAY-CALL XXXXX X X X X

VOIP EP SET JITTERDELAY XXXXX X X X X

VOIP EP SET JITTERMODE XXXXX X X X X

VOIP EP SET LEC 44434 3 4 3 3

VOIP EP SET OFFHOOK-TIME XXXXX X X X X

VOIP EP SET ONHOOK-TIME XXXXX X X X X

VOIP EP SET RXGAIN XXXXX X X X X

VOIP EP SET STUTTER-DIAL-TONE XXXXX X X X X

VOIP EP SET SUPPLEMENTARY-SERVICE-PREFIX XXXXX X X X X

VOIP EP SET TXGAIN XXXXX X X X X

VOIP EP SET UNREGISTERED-TONE XXXXX X X X X

VOIP EP SET VAD XXXXX X X X X

VOIP EP SHOW XXXXX X X X X

Commands

Fiber

Modular

ADSL