User guide

VoIP ADMIN Command Reference VoIP phone ports
6-71
iMG/RG Software Reference Manual (Voice Service)
Description This command creates a prefix-replacement rule. When the rule is added to an endpoint,
if the PREFIX digit-map is matched, it is replaced by the REPLACEMENT digit(s).
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip admin prefix-replacement create prefix001 prefix *001 replacement 04411
See also VOIP ADMIN PREFIX-REPLACEMENT ADD
VOIP ADMIN PREFIX-REPLACEMENT DELETE
VOIP ADMIN PREFIX-REPLACEMENT LIST
VOIP ADMIN PREFIX-REPLACEMENT REMOVE
VOIP ADMIN PREFIX-REPLACEMENT SHOW
6.3.2.1.8 VOIP ADMIN PREFIX-REPLACEMENT DELETE
Syntax VOIP ADMIN PREFIX-REPLACEMENT DELETE <name>
Description This command deletes a prefix-replacement rule.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
name A string identifies the item, 1 to 16 characters in length.
Valid characters are any printable characters, except code
0x2E and 0x2F; digits cannot be used as first character and if
the space character is present, the string must be quoted..
N/A
digit-map An expression string 1 to 16 characters in length. Valid
characters are digit and symbols ‘#’, ‘*’, ‘.’, ‘|’, ‘[’, ‘]’, ‘-‘. The
service is disabled by default.
N/A
digits A telephone number; 1 to 16 characters in length. Valid
characters are only numerical characters accepts the first
one that may assume the ‘+’ letter.
N/A
Option Description Default Value
name An existing prefix replacement rule created with the
command “VOIP ADMIN PREFIX-REPLACEMENT
CREATE”. To display existing access port names, use
the VOIP ADMIN PREFIX-REPLACEMENT LIST
command.
N/A