User guide

VoIP phone ports VoIP ADMIN Command Reference
iMG/RG Software Reference Manual (Voice Service)
6-70
Note: This command is not available once users have been provisioned.
Note: Disabling a specific profile re-sets the numbering plan parameters to default.
Example --> voip admin disable profile
6.3.2.1.5 VOIP ADMIN DISABLE RFC3660-DIGIT-INPUT-TIMER
Syntax VOIP ADMIN DISABLE RFC3660-DIGIT-INPUT-TIMER
Description This command disables the management of critical and partial inter-digit times as speci-
fied in RFC3660.
Example --> voip admin disable rfc3660-digit-input-timer
6.3.2.1.6 VOIP ADMIN PREFIX-REPLACEMENT ADD
Syntax VOIP ADMIN PREFIX-REPLACEMENT ADD <name> PORT <ep-name>
Description This command adds the prefix-replacement rule to an already provisioned endpoint. The
prefix replacement rule must already have been created with the VOIP ADMIN PREFIX-
REPLACEMENT CREATE” command.
Options The following table gives the range of values for each option which can be specified with
this command, and a default value (if applicable).
Example --> voip admin prefix-replacement add pref001 port prt0
See also VOIP ADMIN PREFIX-REPLACEMENT CREATE
VOIP ADMIN PREFIX-REPLACEMENT DELETE
VOIP ADMIN PREFIX-REPLACEMENT LIST
VOIP ADMIN PREFIX-REPLACEMENT REMOVE
VOIP ADMIN PREFIX-REPLACEMENT SHOW
6.3.2.1.7 VOIP ADMIN PREFIX-REPLACEMENT CREATE
Syntax VOIP ADMIN PREFIX-REPLACEMENT CREATE <name> PREFIX <digit-
map> REPLACEMENT <digit>
Option Description Default Value
name An existing prefix replacement rule created with the com-
mand “VOIP ADMIN PREFIX-REPLACEMENT CREATE”.
To display existing access port names, use the VOIP
ADMIN PREFIX-REPLACEMENT LIST command.
N/A
ep-name An existing access port. To display existing access port
names, use the VOIP EP LIST command.
N/A