User guide

VoIP SIP ALERTINFO command reference VoIP SIP
6-57
iMG/RG Software Reference Manual (Voice Service)
----|------------|---------------------
1 | pstn | 9x.
---------------------------------------
See also VOIP SIP FDB CREATE
VOIP SIP FDB SHOW
6.2.9.1.4 VOIP SIP FDB SHOW
Syntax VOIP SIP FDB SHOW <name>
Description This command lists information about a named FDB entry added to the forwarding data-
base using the VOIP SIP FDB CREATE command. The following information is displayed:
•Address
•Domain
•Contact
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip sip fdb show MrJohn
Gateway forwarding database entry: MrJohn
----------------------------------------------
Address: 2010
Area Code (AC):
Domain: 192.168.0.5
Contact: 10.17.90.51
See also VOIP SIP FDB LIST
6.2.10 VoIP SIP ALERTINFO command reference
This section describes the commands available on the iMG intelligent Multiservice Gateway to configure and
manage ringing cadence mapping.
6.2.10.1 VoIP SIP ALERTINFO CLI commands
The table below lists the VoIP SIP ALERTINFO commands provided by the CLI:
Option Description Default Value
name A name (or the ID value) that identifies an existing user in
the forwarding database. To display the existing FDB
entries, use the VOIP SIP FDB LIST command.
N/A