User guide

VoIP SIP VoIP SIP FDB command reference
iMG/RG Software Reference Manual (Voice Service)
6-56
Example --> voip sip fdb create default address 9x. contact 192.168.1.10 domain voip.atkk.com
See also VOIP SIP FDB LIST
VOIP SIP FDB SHOW
6.2.9.1.2 VOIP SIP FDB DELETE
Syntax VOIP SIP FDB DELETE <name>
Description This command deletes a single FDB entry created using the VOIP SIP FDB CREATE com-
mand. To show the list of existing FDB entries, use the VOIP SIP FDB LIST command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip sip fdb delete default
See also VOIP SIP FDB CREATE
VOIP SIP FDB LIST
6.2.9.1.3 VOIP SIP FDB LIST
Syntax VOIP SIP FDB LIST
Description This command lists information about FDB entries added using the VOIP SIP FDB CRE-
ATE com mand.
The following information is displayed:
• FDB entry ID numbers
• FDB entry names
• FDB entry Address
Note: If an FDB name is longer than 32 chars, the name is shown in a short format (only the initial part of the
name is displayed). To show the full name use the VOIP SIP FDB SHOW command, specifying the user
ID instead of user name.
Example --> voip sip fdb list
Gateway Forwarding DataBase:
ID | Name | Address
tel-number It is the new number to which the call is redirected. N/A
Option Description Default Value
name A name (or the ID value) that identifies an existing user in
the forwarding database. To display the existing FDB
entries, use the VOIP SIP FDB LIST command.
N/A