User guide

VoIP SIP VoIP SIP FDB command reference
iMG/RG Software Reference Manual (Voice Service)
6-54
Attached ports: port0
Call Forwarding:
on all calls: not active
on busy: not active
on not answer: not active
not answer time-out: 30 Sec.
See also VOIP SIP USER ADD
VOIP SIP USER CREATE
VOIP SIP USER DELETE
VOIP SIP USER LIST
VOIP SIP USER REMOVE
VOIP SIP USER SHOW
VOIP SIP USER SET
6.2.9 VoIP SIP FDB command reference
This section describes the commands available on the iMG intelligent Multiservice Gateway to configure and
manage the FDB module.
6.2.9.1 VoIP SIP FDB CLI commands
The table below lists the VoIP SIP FDB commands provided by the CLI:
TABLE 6-9 VoIP SIP SDB CLI Commands
6.2.9.1.1 VOIP SIP FDB CREATE
Syntax VOIP SIP FDB CREATE <name> ADDRESS <digit-map> CONTACT <con-
tact-host:port/transport;proxy> [DOMAIN <host>] [FWADDRESS
<tel-number>]
Description This command creates a new entry in the forwarding database (FDB).
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E Modular
ADSL
A
ADSL
B
ADSL
C
VOIP SIP FDB CREATE XXXXX X XXX
VOIP SIP FDB DELETE XXXXX X XXX
VOIP SIP FDB LIST XXXXX X XXX
VOIP SIP FDB SHOW XXXXX X XXX