User guide

VoIP SIP VoIP SIP User command reference
iMG/RG Software Reference Manual (Voice Service)
6-50
Example --> voip sip user create MrBrown address 12345 domain 192.168.102.3 pseudonym
Charlie
See also VOIP SIP USER ADD
VOIP SIP USER CREATE
VOIP SIP USER DELETE
VOIP SIP USER LIST
Option Description Default Value
username An arbitrary name that identifies the user. The name
must not be present already. The username can be at
most 16 characters long; cannot start with a digit and
cannot contain dots '.' or slash symbols '/'.
N/A
digit-map The phone number (E.164) used to reach the user.
The address can be 32 characters long.
N/A
area-number The prefix number to be dialed before the destina-
tion number. Valid characters are only numerical
characters. The area number can be at most 10 digits
long.
empty
login The user name used during the authentication phase.
The login can be at most 32 characters long. The
same rules defined for the username field also apply
here, except the login can start with a digit.
empty
password The password used during the authentication phase.
The password can be at most 16 characters long. The
same rules defined for the username field also apply
here, except the password can start with a digit.
empty
host The domain address in hostname format or IPv4 for-
mat. The domain can be at most 255 characters long.
empty
transport The transport protocol used to contact the user.
Possible values are:
• udp
• tcp
udp
pseudonym
The pseudonym allows iMG SIP users to regis-
ter with a pseudonym (instead of their numeric
address). A user registered by pseudonym can
then be addressed either by pseudonym or
numeric address.
empty