User guide

VoIP SIP VoIP SIP Embeddedserver command reference
iMG/RG Software Reference Manual (Voice Service)
6-46
Description This command lists information about embedded servers that were added using the
VOIP SIP EMBEDDEDSERVER CREATE command. The following information is dis-
played:
• server ID numbers
•server names
• NVS (not used)
• Contact
the IP address (IPv4 or hostname format) of the proxy server
Note: If a name is longer than 32 chars, the name is shown in a short format (only the initial part of the name is
displayed). To show the full name use the VOIP SIP EMBEDDEDSERVER SHOW command, specifying
the server ID instead of server name.
Example --> voip sip embeddedserver list
Gateway - Embedded Proxy Servers:
ID | Name | NVS | Contact
-----|------------|--------|--------------------------------------
1 | def-server | false | 192.168.1.2
------------------------------------------------------------------
See also VOIP SIP EMBEDDEDSERVER CREATE
VOIP SIP EMBEDDEDSERVER SHOW
6.2.7.1.4 VOIP SIP EMBEDDEDSERVER SET EMERGENCY-SERVICE
Syntax
VOIP SIP EMBEDDEDSERVER SET <name> EMERGENCY-SERVICE <service>
Description This command sets the way the embedded server works when the external server is
unreachable.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip sip embedded set def-server emergency-service redirect-server
Option Description Default Value
name An existing embedded server (it can also be the ID value
associated with the embedded server).
N/A
service Service provided by the embedded server when the public
sip proxy is unreachable. Possible values are:
redirect-server or stateless-proxy
redirect-server