User guide

VoIP SIP Embeddedserver command reference VoIP SIP
6-45
iMG/RG Software Reference Manual (Voice Service)
Example --> voip sip embedded create default contact 192.168.102.3
See also VOIP SIP EMBEDDEDSERVER LIST
VOIP SIP EMBEDDEDSERVER SHOW
6.2.7.1.2 VOIP SIP EMBEDDEDSERVER DELETE
Syntax VOIP SIP PROXYSERVER DELETE <name>
Description This command deletes a single embedded server created using the VOIP SIP EMBED-
DEDSERVER CREATE command.
To show the list of existing embedded servers, use the VOIP SIP EMBEDDED LIST com-
mand. Currently only one embedded server can be configured.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip sip embeddedserver delete backuplocserv
See also VOIP SIP EMBEDDEDSERVER CREATE
VOIP SIP EMBEDDEDSERVER LIST
VOIP SIP EMBEDDEDSERVER SHOW
6.2.7.1.3 VOIP SIP EMBEDDEDSERVER LIST
Syntax VOIP SIP EMBEDDEDSERVER LIST
domain The domain name or IPv4 address of the embedded
server where signalling messages are sent.
N/A
host The hostname or IPv4 address of the embedded server
where signalling messages are sent. Host can be at most
256 chars long (when using hostname format).
N/A
port The UDP/TCP port on the embedded server to which
signalling messages are sent.
5060
transport The protocol used to transport the signalling messages
to the embedded server. Possible values are: udp or tcp
udp
Option Description Default Value
name An existing embedded server (it can also be the ID
value associated with the embedded server).
N/A