User guide

VoIP SIP Proxyserver command reference VoIP SIP
6-43
iMG/RG Software Reference Manual (Voice Service)
•
Master
whether the server has been set as Master or not. A star symbol in the field identifies
the server as the current proxy server used by outgoing calls.
•
Contact
the IP address (IPv4 or hostname format) of the proxy server
Note: If a name is longer than 32 chars, the name is shown in a short format (only the initial part of the name is
displayed). To show the full name use the VOIP SIP PROXYSERVER SHOW command, specifying the
server ID instead of server name.
Example
--> voip sip proxyserver list
ID | Name | Master | Contact
-----|------------|----------|--------------------------------------
1 | default | false * | 192.168.1.2
--------------------------------------------------------------------
See also VOIP SIP PROXYSERVER CREATE
VOIP SIP PROXYSERVER SHOW
6.2.6.1.4 VOIP SIP PROXYSERVER SET MASTER
Syntax VOIP SIP PROXYSERVER SET <name> MASTER
Description This command sets a proxy server as Master. If another proxy server was set Master pre-
viously, the flag Master is removed from the old one.
To show the list of existing proxy servers, use the VOIP SIP PROXYSERVER LIST com-
mand.
Example --> voip sip proxyserver set backuplocserv master
See also VOIP SIP PROXYSERVER CREATE
VOIP SIP PROXYSERVER LIST
VOIP SIP PROXYSERVER SHOW
Option Description Default Value
name An arbitrary name that identifies the proxy server. The
name must not be present already.The name can be at
most 16 characters long; cannot start with a digit and
cannot contain dots '.' or slash symbols '/'.
N/A