User guide

VoIP SIP VoIP SIP Locationserver command reference
iMG/RG Software Reference Manual (Voice Service)
6-40
• Master
whether the server has been set as Master or not. A star symbol in the field identi-
fies the server as the current location server where local users are registered.
•
Contact
the IP address (IPv4 or hostname format) of the location server
Note: If a name is longer than 32 chars, the name is shown in a short format (only the initial part of the name is
displayed). To show the full name use the VOIP SIP LOCATIONSERVER SHOW command, specifying
the server ID instead of server name.
Example --> voip sip location list
ID | Name | Master | Contact
-----|------------|----------|--------------------------------------
1 | default | false * | 192.168.1.2
--------------------------------------------------------------------
See also VOIP SIP LOCATIONSERVER CREATE
VOIP SIP LOCATIONSERVER SHOW
6.2.5.1.4 VOIP SIP LOCATIONSERVER SET MASTER
Syntax VOIP SIP LOCATIONSERVER SET <name> MASTER
Description This command sets a location server as Master. If another location server was set Master
previously, the flag Master is removed from the old one.
To show the list of existing location servers, use the VOIP SIP LOCATIONSERVER LIST
command.
Example --> voip sip locationserver set backuplocserv master
See also VOIP SIP LOCATIONSERVER CREATE
VOIP SIP LOCATIONSERVER LIST
VOIP SIP LOCATIONSERVER SHOW
Option Description Default Value
name An arbitrary name that identifies the proxy server. The
name must not be present already.The name can be at
most 16 characters long; cannot start with a digit and
cannot contain dots '.' or slash symbols '/'.
N/A