User guide

VoIP SIP Locationserver command reference VoIP SIP
6-39
iMG/RG Software Reference Manual (Voice Service)
Example
--> voip sip locationserver create default contact 192.168.102.3
See also VOIP SIP LOCATIONSERVER LIST
VOIP SIP LOCATIONSERVER SHOW
6.2.5.1.2 VOIP SIP LOCATIONSERVER DELETE
Syntax VOIP SIP LOCATIONSERVER DELETE <name>
Description This command deletes a single location server created using the VOIP SIP LOCATION-
SERVER CREATE command.
To show the list of existing location servers, use the VOIP SIP LOCATIONSERVER LIST
command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip sip locationserver delete backuplocserv
See also VOIP SIP LOCATIONSERVER CREATE
VOIP SIP LOCATIONSERVER LIST
VOIP SIP LOCATIONSERVER SHOW
6.2.5.1.3 VOIP SIP LOCATIONSERVER LIST
Syntax VOIP SIP LOCATIONSERVER LIST
Description This command lists information about location servers that were added using the VOIP
SIP LOCATIONSERVERS CREATE command. The following information is displayed:
• Server ID numbers
• Server names
transport The protocol used to transport the signalling messages to
the location server. Possible values are:
• udp
• tcp
udp
Option Description Default Value
name An existing location server (it can also be the ID
value associated with the location server). To
display the existing location servers, use the
VOIP SIP LOCATIONSERVER LIST command.
N/A