User guide

VoIP SIP VoIP SIP command reference
iMG/RG Software Reference Manual (Voice Service)
6-28
Example --> voip sip protocol set defaultport 5060
See also VOIP SIP PROTOCOL ENABLE
6.2.4.1.7 VOIP SIP PROTOCOL SET EXTENSION
Syntax VOIP SIP PROTOCOL SET EXTENSION <extension>
Description This command sets extended protocol features.
Note: 100rel and Session Timer are always supported when requested; setting “session-timer” the user agent
explicitly requires this keep-alive mechanism. Info method overlaps the event transfer supported by RTP
sessions.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip sip protocol set extension session-timer
See also VOIP SIP PROTOCOL SHOW
6.2.4.1.8 VOIP SIP PROTOCOL SET INFO
Syntax
VOIP SIP PROTOCOL SET INFO {DTMF_0 | DTMF_1 | DTMF_2 | DTMF_3 |
DTMF_4 | DTMF_5 | DTMF_6 | DTMF_7 | DTMF_8 | DTMF_9 | DTMF_Star |
DTMF_Gate | DTMF_A | DTMF_B | DTMF_C | DTMF_D | Flash} <token>
Description This command sets mappings for out of band DTMF digits and flash-hook signals within
SIP INFO methods using the application/dtmf-relay content type.
Option Description Default Value
ipport UDP/TCP port number used for signalling mes-
sages. Available values are in the range 1026 to
65534.Only even values can be accepted
5060
Option Description Default Value
extension Extension is comma separated list of values
defining the protocol extension. Available values
are:
info
session-timer
keep-18x-session
none
none