User guide

VoIP SIP iMG SIP Overview
iMG/RG Software Reference Manual (Voice Service)
6-16
Call agent names
Note: If a call agent name is longer than 32 chars, the name is shown in a short format (only the initial part of
the name is displayed).
Example --> voip sip fdb list
Gateway call-agents:
ID | Name | Master | Contact
-----|------------|----------|---------------------
1 | default | true * | 172.39.1.201
---------------------------------------------------
See also VOIP MGCP CALLAGENT CREATE
VOIP MGCP CALLAGENT SHOW
6.2 VoIP SIP
This chapter describes how to configure the iMG for connection to a VoIP network using the SIP protocol.
6.2.1 iMG SIP Overview
6.2.1.1 iMG call processes
The iMG can communicate with the following devices:
• Another VoIP terminal on the IP network, such as another iMG.
• Any LAN SIP endpoint on the IP network, for instance:
• A Soft Phone
• An IP phone directly connected to the IP network
6.2.1.2 Calls involving another terminal
The following example shown in Figure 6-1 illustrates how to reach a phone or fax on another iMG terminal.