User guide

System Management System command reference
iMG/RG Software Reference Manual (System Configuration)
1-26
Description This command displays a list of logins and users added to the system using the SYSTEM
ADD LOGIN and SYSTEM ADD USER commands. The same information is displayed by
the SYSTEM LIST USERS command.
The list contains the following information:
• user ID number
•user name
• configuration permissions (enabled or disabled)
• engineer or customer web pages configuration permissions (enabled or disabled)
• dialin permissions (enabled or disabled)
• access level (default, engineer or super user)
• comment (any comments that were included when the user was added to the sys-
tem)
Example --> system list users
Users:
May May Conf May
ID | Name | Conf. | web | Dialin | Level | Comment
-----|-------|---------|---------|----------|--------- -|------------
1 | admin | ENABLED | ENABLED | disabled | superuser | Admin user
---------------------------------------------------------------------
See also SYSTEM LIST ERRORS
SYSTEM LIST LOGINS
1.1.5.1.21 SYSTEM LOCATION
Syntax SYSTEM LOCATION <NONE/sys-location>
Description This command sets the location info for the gateway.
Example --> system location milan
1.1.5.1.22 SYSTEM LOG
Syntax SYSTEM LOG {NOTHING|WARNINGS|INFO|TRACE|ENTRYEXIT|ALL}
Description This command sets the level of output that is displayed by the CLI for various modules.
Setting a level also implicitly displays the level(s) below it.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).