User guide

VOIP MGCP command reference VoIP MGCP
6-15
iMG/RG Software Reference Manual (Voice Service)
6.1.7.2.10 VOIP MGCP CALLAGENT SET MASTER
Syntax VOIP MGCP CALLAGENT SET <name> MASTER
Description This command set an existing call agent as Master. The Master call agent is the call agent
that is attempted to be used firstly. In case of failure of the communication with it, the
other call agent in the list will be used.
Example --> voip mgcp callagent set default master
See also VOIP MGCP CALLAGENT LIST
VOIP MGCP CALLAGENT DELETE
6.1.7.2.11 VOIP MGCP CALLAGENT DELETE
Syntax VOIP MGCP CALLAGENT DELETE <name>
Description This command deletes a previously defined call agent created using the VOIP MGCP
CALLAGENT CREATE command.
To show the list of existing CALLAGENT entries, use the VOIP MGCP CALLAGENT
LIST command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip mgcp callagent delete default
See also VOIP MGCP CALLAGENT CREATE
VOIP MGCP CALLAGENT LIST
6.1.7.2.12 VOIP MGCP CALLAGENT LIST
Syntax VOIP MGCP CALLAGENT LIST
Description This command lists information about CALLAGENT entries added using the VOIP MGCP
CALLAGENT CREATE command.
The following information is displayed:
Call agent ID numbers
Option Description Default Value
name A name (or the ID value) that identifies an existing call
agent. To display the existing calla agent entries, use the
VOIP MGCP CALLAGENT LIST command.
N/A