User guide

VOIP MGCP command reference VoIP MGCP
6-13
iMG/RG Software Reference Manual (Voice Service)
6.1.7.2.7 VOIP MGCP PROTOCOL SET ROUNDTRIPTIME
Syntax VOIP MGCP PROTOCOL SET ROUNDTRIPTIME <msec>
Description This command sets the maximum time out that an MGCP message needs to be acknowl-
edged by the call agent before the same message is retrasmitted.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip mgcp protocol set roundtriptime 1500
6.1.7.2.8 VOIP MGCP PROTOCOL SHOW
Syntax VOIP MGCP PROTOCOL SHOW [<name>]
Description This command displays basic MGCP module configuration parameters set by the VOIP
MGCP PROTOCOL ENABLE command.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip mgcp protocol show
Gateway base protocol: MGCP
---------------------------------------------------------
Profile: sphere
Supported packages:
Basic, Generic Media, DTMF, Line
Piggy-Back: Enable
Network interface: ip0
Default port: 2427
NAT: None
HeartBeat: Enable
Option Description Default Value
msec Maximum number of milliseconds that the system
wait for an answer from the call agent.
1000
Option Description Default Value
name An existing access port. To display the existing
access port names, use the VOIP EP LIST com-
mand.
N/A