User guide

SNTP SNTP command reference
iMG/RG Software Reference Manual (System Administration)
5-104
Packet Retry Attempts: 2
Daylight Saving : Enabled
Daylight Saving Done : True
sntpclient list servers
See also SNTPCLIENT LIST SERVERS
5.3.3.1.13 SNTPCLIENT SET CLOCK
Syntax SNTPCLIENT SET CLOCK <sntpclock>
Description This command sets the system clock to a specific time and date. This command can be
used as an alternative to synchronizing the local system clock via internal or external
timeservers.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example The following command sets the system clock to 11:10:13pm, 29th December 2003:
--> sntpclient set clock 2003:12:29:23:10:13
Option Description Default Value
sntpclock Sets the time and date of the system clock in
the following format: yyyy:mm:dd:hh:mm:ss
N/A