User guide

SNTP command reference SNTP
5-103
iMG/RG Software Reference Manual (System Administration)
5.3.3.1.11 SNTPCLIENT SET RETRIES
Syntax SNTPCLIENT SET RETRIES <retries>
Description This command sets the number of packet retry attempts when no response is received
from a timeserver. The SNTP client will send another packet for synchronization after a
timeout.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> sntpclient set retries 4
See also SNTPCLIENT SET TIMEOUT
5.3.3.1.12 SNTP SHOW STATUS
Syntax SNTPCLIENT SHOW STATUS
Description This command displays the SNTP client status information.
Example --> sntpclient show status
- SNTP CLIENT STATUS -
----------------------
Clock Synchronized: TRUE
SNTP Standard Version Number: 4
SNTP Mode(s) Configured: Unicast
Local Time: Mon, 14 Sep 2009 - 05:36:26
Local Timezone: EST, US Eastern Standard Time
Time Difference +- UTC: -4:00
Server Stratum: 3
Precision: 1/1048576 of a second
Root Delay: +0.618 second(s)
Dispersion: 0.5578 second(s)
Server Reference ID: 10.17.90.68
Round Trip Delay: 0 second(s)
Local Clock Offset: -17999 second(s)
Resync Poll Interval: 20 minute(s)
Packet Retry Timeout: 5 second(s)
Option Description Default Value
retries Sets the number (between 0-10) of packet retry attempts
made when no response is received from a timeserver.
2