User guide

SNTP command reference SNTP
5-97
iMG/RG Software Reference Manual (System Administration)
5.3.3.1.4 SNTPCLIENT LIST SERVERS
Syntax SNTPCLIENT LIST SERVERS
Description This command lists the servers added using the SNTPCLIENT ADD SERVER com-
mand.
Example --> sntpclient list servers
SNTPClient Servers:
ID | IP Address
-----|------------------
1 | 239.252.197.0
------------------------
See also SNTPCLIENT ADD SERVER
5.3.3.1.5 SNTPCLIENT SET DAYLIGHTSAVINGTIME
Syntax SNTPCLIENT SET DAYLIGHTSAVINGTIME ENABLE|DISABLE
Description This command sets the SNTP client to automatically switch between the standard time
and the daylight saving time according to the time zone.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> sntpclient set daylightsavigntime enable
5.3.3.1.6 SNTPCLIENT SET TIMEZONE
Syntax SNTPCLIENT SET TIMEZONE <timezone>
Description This command sets the local time zone abbreviation as a parameter and configures the
local system to be up to + 13 hours of the Universal Time Coordinate (UTC). Sixty-four
of the world’s most prominent time zones are represented (including those using stan-
dard time and summer/daylight savings time).
Options The following table gives the 64 time zone abbreviations that you can use in this com-
mand to set the timezone difference for the system timer. The table also contains the dif-
Option Description Default Value
enable Enables the selected time synchronous access mode. N/A
disable Disables the selected time synchronous access mode. N/A