User guide

SNTP SNTP command reference
iMG/RG Software Reference Manual (System Administration)
5-96
Example Example 1 - IP address
--> sntpclient add server ipaddress 129.6.15.28
Example 2 - hostname
--> sntpclient add server hostname time-a.nist.gov
5.3.3.1.2 SNTPCLIENT CLEAR SERVERS
Syntax SNTPCLIENT CLEAR SERVERS
Description This command deletes the servers added using the sntpclient add server command.
Example --> sntpclient clear servers
See also SNTPCLIENT ADD SERVER
5.3.3.1.3 SNTPCLIENT DELETE SERVER
Syntax SNTPCLIENT DELETE SERVER <serverid>
Description This command deletes a single server previously added using the sntpclient add server
command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> sntpclient delete server 1
See also SNTPCLIENT ADD SERVER
SNTPCLIENT LIST SERVERS
Option Description Default Value
sntpipaddress The IP address of the dedicated unicast server
that SNTP can use to synchronize its time.
N/A
sntphostname The hostname of the dedicated unicast server
that SNTP can use to synchronize its time.
N/A
Option Description Default Value
serverid
The server ID displayed by the
SNTPCLIENT LIST
SERVERS
command.
N/A