User guide

DNS Client command reference Domain name system - DNS
5-89
iMG/RG Software Reference Manual (System Administration)
Description This command sets the LAN domain name of your device. DHCP server can then be
configured to give out this address to DHCP clients.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dnsrelay set landomainname alliedtelesyn.com
See also DNSRELAY SET LANDOMAINNAME
DHCPSERVER SET SUBNET ASSIGNAUTODOMAIN
5.2.3.1.11 DNSRELAY SHOW LANDOMAINNAME
Syntax dnsrelay show landomainname
Description This command displays the domain name used by the DNS relay to determine if a host
name request is for the local database.
Example --> dnsrelay show landomainname
LAN Domain Name: alliedtelesyn.com
See also DNSRELAY SET LANDOMAINNAME
5.2.4 DNS Client command reference
This section describes the commands available on the gateway to enable, configure and manage the DNS Client
module.
5.2.4.1 DNS Client CLI commands
The table below lists the DNSclient commands provided by the CLI:
Option Description Default Value
name The LAN domain name that identifies your device. N/A