User guide

Domain name system - DNS DNS Relay command reference
iMG/RG Software Reference Manual (System Administration)
5-88
See also DNSRELAY LIST SERVERS
5.2.3.1.7 DNSRELAY LIST SERVERS
Syntax DNSRELAY LIST SERVERS
Description This command displays the DNS relay’s list of DNS server IP addresses with their identi-
fication numbers.
Example --> dnsrelay list servers
DNS Relay Servers:
ID | IP Address
-----|------------------
1 | 239.252.197.0
------------------------
5.2.3.1.8 DNSRELAY SET HOSTNAME
Syntax DNSRELAY SET HOSTNAME <name>
Description This command sets the host name of your device.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dnsrelay set hostname myhost
See also DNSRELAY SET LANDOMAINNAME
DHCPSERVER SET SUBNET ASSIGNAUTODOMAIN
5.2.3.1.9 DNSRELAY SET DYNAMICSERVERPRIORITY
Syntax DNSRELAY SET DYNAMICSERVERPRIORITY ENABLE|DISABLE
Description This command enable or disable the dynamic server priority when more than one server
is available.
5.2.3.1.10 DNSRELAY SET LANDOMAINNAME
Syntax DNSRELAY SET LANDOMAINNAME <name>
Option Description Default Value
name The hostname that identifies your device. N/A