User guide

DNS Relay command reference Domain name system - DNS
5-87
iMG/RG Software Reference Manual (System Administration)
Example --> dnsrelay delete server 3
See also DNSRELAY LIST SERVERS
5.2.3.1.5 DNSRELAY ENABLE|DISABLE
Syntax DNSRELAY {ENABLE | DISABLE}
Description This command enables/disables DNS relay on your device. You must have DNS relay
enabled in order to carry out any DNS relay configuration. If you try configuring DNS
relay before you have entered the dnsrelay enable command, the CLI issues a warning
message.
To display the current state of DNS relay, use the DNSRELAY SHOW command
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dnsrelay disable
See also DNSRELAY LIST SERVERS
5.2.3.1.6 DNSRELAY SHOW
Syntax DNSRELAY SHOW
Description This command indicates the status of DNS relay, enabled or disabled.
Example --> dnsrelay show
Global DNS Relay Configuration:
Status: ENABLED
Option Description Default Value
ID number A number that identifies the DNS server in the DNS
relay list. To display server numbers, use the
DNSRELAY LIST SERVERS command.
N/A
Option Description Default Value
enable Enables dnsrelay. enable
disable Disables dnsrelay.