User guide

Dynamic Host Configuration Protocol DHCP Relay Command Reference
iMG/RG Software Reference Manual (System Administration)
5-82
Example --> dhcprelay enable
See also dhcpserver enable|disable
5.1.7.1.5 DHCPRELAY LIST SERVERS
Syntax DHCPRELAY LIST SERVERS
Description This command displays the DHCP relay's list of DHCP server IP addresses with their
identification numbers.
Example --> dhcprelay list servers
DHCP Servers:
ID | IP Address
-----|------------------
1 | 192.168.102.3
2 | 239.252.197.0
------------------------
See also dhcpserver list subnets
5.1.7.1.6 DHCPRELAY SHOW
Syntax DHCPRELAY SHOW
Description This command tells you whether DHCP relay is enabled or disabled.
Example --> dhcprelay show server
Global DHCP Relay Configuration:
Status: ENABLED
See also DHCPRELAY ENABLE|DISABLE
5.1.7.1.7 DHCPRELAY UPDATE
Syntax DHCPRELAY UPDATE
Option Description Default Value
enable Enables configuration of DHCP relay. enable
disable Disables configuration of DHCP relay. enable