User guide

DHCP Relay Command Reference Dynamic Host Configuration Protocol
5-79
iMG/RG Software Reference Manual (System Administration)
The command does not have effect until the DHCPCLIENT UPDATE command is
entered.
To retrieve the current settings, use the DHCPCLIENT SHOW command.
Options The following table gives the range of values for each option which can be specified with
this command and a default value (if applicable).
Example --> dhcpclient set force-broadcast-renew enabled
5.1.6.1.33 DHCPCLIENT SHOW
Syntax DHCPCLIENT SHOW
Description This command displays the following global configuration information about DHCP client:
• reboot time
•retry time
• maximum backoff time
• ip renewal mode
Example --> dhcpclient show
Global DHCP Client Configuration:
Reboot time: 10
Retry time: 300
Max. backoff time: 120
Broadcast Renew: false
See also DHCPCLIENT SET REBOOT
DHCPCLIENT SET RETRY
DHCPCLIENT SET BACKOFF
5.1.7 DHCP Relay Command Reference
This section describes the commands available on AT-RG624/634/644 Residential Gateway to enable, configure
and manage DHCP Relay module.
Option Description Default Value
enabled Force the dhcpclient to renew the ip address
always in broadcast mode
disabled Do not force the dhcpclient to renew the ip
address always in broadcast mode,
disabled