User guide

DHCP Client command reference Dynamic Host Configuration Protocol

5-77

iMG/RG Software Reference Manual (System Administration)

Example --> dhcpclient set interfaceconfig client1 server 192.168.101.2

See also DHCPCLIENT SET INTERFACECONFIG DHCPINFORM ENABLED|DISABLED

5.1.6.1.28 DHCPCLIENT SET BROADCAST-FLAG

Syntax DHCPCLIENT SET BROADCAST-FLAG ENABLE|DISBALE

Description This command set the broadcast flag in the dhcpclient request. The default value is enable

Example --> dhcpclient set broadcast-flag disable

5.1.6.1.29 DHCPCLIENT SET INITIALINTERVAL

Syntax DHCPCLIENT SET INITIALINTERVAL <initialinterval>

Description This command sets the first polling interval for the DHCP client

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

Example --> dhcpclient set initialintervall 3600

Option Description Default Value

name An existing DHCP client interface. To display cli-

ent interface names, use the

DHCPCLIENT

LIST INTERFACECONFIGS

command.

N/A

number An existing DHCP client interface. To display cli-

ent interface numbers, use the DHCPCLIENT

LIST INTERFACECONFIGS

command.

N/A

ipaddress The IP address of a DHCP server that DHCP cli-

ent can use to obtain configuration parameters.

The IP address is displayed in the following format:

192.168.102.3

N/A

Option Description Default Value

initialintervall The time (in seconds) between the first and the sec-

ond DHCP request.