User guide

Dynamic Host Configuration Protocol DHCP Client command reference
iMG/RG Software Reference Manual (System Administration)
5-76
Example --> dhcpclient set interfaceconfig client1 requestedleasetime 70000
See also DHCPCLIENT LIST INTERFACECONFIGS
DHCPSERVER SET MAXLEASETIME
DHCPSERVER SET DEFAULTLEASETIME
5.1.6.1.27 DHCPCLIENT SET INTERFACECONFIG SERVER
Syntax DHCPCLIENT SET INTERFACECONFIG {<name>|<number>} SERVER
<ipaddress>
Description If dhcpclient set dhcpinform has been set to enabled, this command will unicast the first
DHCPINFORM message to the specific DHCP server at the specified IP address. If the
first unicast fails, the DHCPINFORM will default to broadcasting its messages.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing DHCP client interface. To display client
interface names, use the
DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A
number An existing DHCP client interface. To display client
interface numbers, use the
DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A
requested lease
time
The lease time (in seconds) that a DHCP client
requests from the DHCP server.
86400