User guide

DHCP Client command reference Dynamic Host Configuration Protocol
5-75
iMG/RG Software Reference Manual (System Administration)
5.1.6.1.25 DHCPCLIENT SET INTERFACECONFIG NOCLIENTID
Syntax DHCPCLIENT SET INTERFACECONFIG {<name>|<number>} NOCLIENTID
Description This command deletes a client identifier from a DHCP client. The DHCP server must
have ‘allowunknownclients’ enabled in order to work with DHCP clients that are not spe-
cifically named in DHCP server configuration or its lease database.
Options The following table gives the range of values for each option which can be specified with
this command and a default value (if applicable).
Example --> dhcpclient set interfaceconfig client1 noclientid
See also DHCPCLIENT SET INTERFACECONFIG CLIENTID
DHCPSERVER SET ALLOWUNKNOWNCLIENTS
5.1.6.1.26 DHCPCLIENT SET INTERFACECONFIG REQUESTEDLEASETIME
Syntax DHCPCLIENT SET INTERFACECONFIG {<name>|<number>} REQUEST-
EDLEASETIME <requestedleasetime>
Description The DHCP client requests a specific lease time from the DHCP server for the allocated
IP addresses. This command determines the length of lease time requested. The DHCP
server will ‘cap’ a requested lease time if it is too large.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing DHCP client interface. To display client inter-
face names, use the
DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A
number An existing DHCP client interface. To display client inter-
face numbers, use the DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A