User guide

Dynamic Host Configuration Protocol DHCP Client command reference
iMG/RG Software Reference Manual (System Administration)
5-74
Example --> dhcpclient set interfaceconfig client1 givednstorelay disabled
See also DHCPCLIENT LIST INTERFACECONFIGS
5.1.6.1.24 DHCPCLIENT SET INTERFACECONFIG INTERFACE
Syntax DHCPCLIENT SET INTERFACECONFIG {<name>|<number>} INTERFACE
<ipinterface>
Description This command sets the IP interface that will have its configuration set by the DHCP cli-
ent interface. The client interface can only set the IP configuration if the IP interface has
DHCP enabled, using the ip set interface dhcp command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpclient set interfaceconfig client1 interface ip2
See also DHCPCLIENT LIST INTERFACECONFIGS
IP LIST INTERFACES
IP SET INTERFACE DHCP
number An existing DHCP client interface. To display client
interface numbers, use the DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A
enabled DHCP client passes DNS server addresses to DNS
relay.
enabled
disabled DHCP client does not pass DNS server addresses to
DNS relay.
Option Description Default Value
name An existing DHCP client interface. To display client
interface names, use the
DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A
number An existing DHCP client interface. To display client
interface numbers, use the
DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A
ipinterface An existing IP interface with DHCP enabled. To
display interface names, use the
IP LIST
INTERFACES
command.
N/A