User guide

DHCP Client command reference Dynamic Host Configuration Protocol
5-73
iMG/RG Software Reference Manual (System Administration)
Example --> dhcpclient set interfaceconfig client1 givednstoclient disabled
See also DHCPCLIENT LIST INTERFACECONFIGS
5.1.6.1.23 DHCPCLIENT SET INTERFACECONFIG GIVEDNSTORELAY ENABLED|DISABLED
Syntax DHCPCLIENT SET INTERFACECONFIG {<name>|<number>} GIVEDN-
STORELAY {ENABLED|DISABLED}
Description This command enables/disables whether DHCP client passes received DNS server
addresses to DNS relay. If no DHCP interfaceconfigs have been added to the system, by
default DHCP client will pass DNS server addresses to DNS relay.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing DHCP client interface. To display client inter-
face names, use the
DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A
number An existing DHCP client interface. To display client inter-
face numbers, use the DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A
enabled DHCP client passes DNS server addresses to DNS client. disabled
disabled DHCP client does not pass DNS server addresses to DNS
client.
Option Description Default Value
name An existing DHCP client interface. To display client
interface names, use the
DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A