User guide

Dynamic Host Configuration Protocol DHCP Client command reference
iMG/RG Software Reference Manual (System Administration)
5-72
DHCP client will attempt to renew its lease early or, if using DHCPINFORM, will
attempt to obtain a new set of configuration parameters from the DHCP server.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpclient set interfaceconfig forcerenew enabled
See also DHCPCLIENT SET INTERFACECONFIG DHCPINFORM ENABLED|DISABLED
DHCPSERVER FORCERENEW
5.1.6.1.22 DHCPCLIENT SET INTERFACECONFIG GIVEDNSTOCLIENT ENABLED|DISABLED
Syntax DHCPCLIENT SET INTERFACECONFIG {<name>|<number>} GIVEDNSTO-
CLIENT {ENABLED|DISABLED}
Description This command enables/disables whether DHCP client passes received DNS server
addresses to DNS client. If no DHCP interfaceconfigs have been added to the system, by
default DHCP client will not pass DNS server addresses to DNS client.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing DHCP client interface. To display client inter-
face names, use the
DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A
number An existing DHCP client interface. To display client inter-
face numbers, use the
DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A
enabled DHCP client responds to DHCPFORCERENEW requests disabled
disabled DHCP client does not respond to DHCPFORCERENEW
requests