User guide

DHCP Client command reference Dynamic Host Configuration Protocol
5-65
iMG/RG Software Reference Manual (System Administration)
Description This command displays a list of the options that the DHCP client sends to the DHCP
server. These options were set using the dhcpclient interfaceconfig add sent option com-
mand. The following information is displayed:
• Option identification number
• Option identifier (name)
• Suggested value
Options and their values are detailed in RFC2132.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpclient interfaceconfig client1 list sent options
DHCP client options to be sent to server for client1:
ID | Identifier | Suggested Value
-----|--------------------|---------------------
1 | host-name | vancouver
2 | domain-name | alliedtelesyn
------------------------------------------------
See also DHCPCLIENT INTERFACECONFIG ADD SENT OPTION
DHCPCLIENT INTERFACECONFIG CLEAR SENT OPTIONS
DHCPCLIENT INTERFACECONFIG DELETE SENT OPTION
DHCPSERVER SUBNET ADD OPTION
For information on RFC 2132, see http://www.ietf.org/rfc/rfc2132.txt
5.1.6.1.13 DHCPCLIENT LIST INTERFACECONFIGS
Syntax DHCPCLIENT LIST INTERFACECONFIGS
Description This command lists the following information about existing DHCP client interfaces:
Option Description Default Value
name An existing DHCP client interface. To display client inter-
face names, use the
DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A
number An existing DHCP client interface. To display client inter-
face numbers, use the DHCPCLIENT LIST INTER-
FACECONFIGS
command.
N/A